1 edition of Earthquake Experience And Seismic Qualification by Indirect Methods in Nuclear Installations (Iaea Tecdoc Series) found in the catalog.
Earthquake Experience And Seismic Qualification by Indirect Methods in Nuclear Installations (Iaea Tecdoc Series)
February 5, 2003
by International Atomic Energy Agency
Written in English
|The Physical Object|
Seismic design considerations of nuclear fuel cycle facilities at structural integrity in case of an earthquake) to the latest seismic nuclear codes (aimed at The AGM and the CS collected a state of the art in the experience of Member States in the seismic design of these facilities as a starting point for a discussion on common safety. Equipment and Seismic Qualification This three-day course provides a better understanding and hands-on application of equipment and seismic qualification requirements, methods of compliance, validation of results, and proper documentation techniques. Emphasis is on electrical equipment with successful equipment qualification program examples.
TRU Compliance offers a performance based engineering approach to test nonstructural components for the ability to maintain structural integrity, and other structural code requirements. Special Seismic Certification, also referred to as Seismic Qualification, is a product approval for components like mechanical and electrical systems. Seismic qualification, prerequisite for determination of seismic fragility of the SSC of a NPP, is conducted by either direct method involving analysis and testing; or indirect one involving Author: Zhen Cai.
EVOLUTION OF SEISMIC DESIGN OF STRUCTURES, SYSTEMS AND COMPONENTS OF NUCLEAR POWER PLANTS K.V. Subramanian Tata Consulting Engineers Limited Mumbai ABSTRACT Safety of the personnel of a nuclear power plant (NPP) and the environment around the plant should be ensured against all natural hazards including earthquakes. Seismic Shear and Seismic Tension Testing of Anchors. Element is also accredited by the International Accreditation Service (IAS) to conduct the specialised testing of concrete anchors including moving crack and seismic testing, as well as the Method A embrittlement test, required for two acceptance criteria, AC and AC
Annals of agriculture and other useful arts
Bugs Bunnys Globe-Hopper Hare (Pop-Up Storybook)
A study of the biographical and personality factors of creative women in music
Waiting for Godot
Behavior modification--what it is - and isnt
Cooking for your hearts sake
Fifty-one years of Victorian life
pharmacology of some angiotensin antagonists.
The passing of the legions
Seismic qualification by indirect methods in nuclear installations A Vienna, Austria EARTHQUAKE EXPERIENCE AND SEISMIC QUALIFICATION BY INDIRECT METHODS IN NUCLEAR INSTALLATIONS IAEA, VIENNA, IAEA. Earthquake Experience and Seismic Qualification by Indirect Methods in Nuclear Installations If you would like to learn more about the IAEA’s work, sign up for our weekly updates containing our most important news, multimedia and more.
Seismic design and qualification for nuclear power ptants: a safety guide. — Vienna: International Atomic Energy Agency, p.
; 24 cm. — (Safety series, ISSN ; SG-DI5) STI/PUB/ ISBN Includes bibliographical references. Nuclear power plants—Earthquake effects. Nuclear engineering—File Size: 3MB. nuclear installations than nuclear power plants. The present publication provides guidance and recommends procedures for the design of nuclear installations to cope with the effects generated by earthquakes.
It supersedes the Safety Guide on Seismic Design and Qualification for Nuclear Power Plants, IAEA Safety Standards Series No. NS-G (). (5) Design and qualification methods and means of protection for a broad range of nuclear installations, i.e.
land based stationary nuclear power plants, research reactors, nuclear fuel fabrication facilities, enrichment facilities, reprocessing facilities and independent spent fuel storage facilities ; (6) Application of the management system. It also gives guidance on a consistent application of methods and procedures for analysis, testing and qualification of structures and equipment so that they meet the safety requirements covering the design of nuclear power plants, safety assessments for the design and the regulatory issues concerned with the licensing of plants.
Contents: 1. It also gives guidance on a consistent application of methods and procedures for analysis, testing and qualification of structures and equipment so that they meet the safety requirements covering the design of nuclear power plants, safety assessments for the design and the regulatory issues concerned with the licensing of plants.
standards and measures are issued in the IAEA Safety Standards Series. This series covers nuclear safety, radiation safety, transport safety and waste safety, and also general safety (that is, of relevance in two or more of the four areas), and the categories within it are Safety Fundamentals, Safety Requirementsand Safety Guides.
Nuclear plants are designed and built with layer upon layer of protection against earthquakes. In recent years as North America and regions abroad have experienced significant earthquakes, experience has confirmed the seismic robustness of nuclear plants.
Nuclear plants have several aspects of seismic protection, including safety factors applied. Earth free oscillations, earthquakes Surface waves, earthquakes Surface waves, P and S waves, earthquakes with M > 6 P and S waves, earthquakes with M> 2 P and S waves, earthquakes, Mseismic sources. This paper draws upon experience of seismic qualification programmes on a number of contemporary UK nuclear installations.
The various methods available for the seismic qualification of civil works are explained and guidance is given on the choice of appropriate qualification methods. Approaches to the qualification of M&E equipment are also. of HVAC duct and damper systems in nuclear power plants.
The EPRI report summarizes earthquake and shake table experience data for these systems and identifies the characteristics that could lead to failure or unacceptable behavior in an earthquake. The seismic experience data show that HVAC duct and damper systems exhibit extremely good.
COMMITTEE ON THE SAFETY OF NUCLEAR INSTALLATIONS Workshop on the Seismic Re-evaluation of all Nuclear Facilities - Benefits and disadvantages of the various methods of re-evaluation (Seismic PSA, Margins, Short reports on "lessons learned from high magnitudes earthquakes with respect to nuclear codes and standards" are under preparation.
A seismic qualification database being developed on the basis of proper experience and a large volume of results obtained in previous works (more than pieces of inspected equipment) can increase the efficacy of computational-experimental evaluation of the seismic resistance of the equipment in commissioned power-generating units at NPPs and power units with extended by: 1.
The conditions for using the SMA method based on foreign databases on seismic classification are examined. In contrast to the initial SMA Earthquake Experience and Seismic Qualification by Indirect Methods in Nuclear Installations, TECDOCIAEA, Vienna ().
: E. Saakov, S. Ryasnyi, P. Kaznovskii, K. Kas’yanov, I. Zaikin. Earthquake experience and seismic qualification by indirect methods in nuclear installations IAEA-TECDOC IAEA Report: Consideration of external events in the design of nuclear facilities other than nuclear power plants, with emphasis on earthquakes, dated March the seismic requaliﬁcation of existing U.S Nuclear Power Plant for higher Earthquake levels or analytical techniques diﬀerent from those originally speciﬁed.
Pentti Varpasuo() published paper on Seismic design and analysis of nuclear power plant structures. In his paper, The seismic design and analysis of nuclear power. Experience-based seismic qualification of equipment involves the collection of data describing the perfonnanco: of equipment classes based on (1) actual earthquake experience, (2) shake table test results or, (3) analyses demonstrating the capability toFile Size: KB.
2/41 remSeismic Qualification of NPP Structures, Systems and Equipment Components STEVENSON AND ASSOCIATES Office in Czech Republic a.
s., Vejprni CZ 00 Pilsen, Czech Republic ‐sed‐0 – Overview of Existing Standards – Principles of Equipment Seismic Qualification (SQ)File Size: 1MB.
TECDOCEarthquake Experience and Seismic Qualification by Indirect Methods in Nuclear Installations, IAEA, Vienna (). TECDOCBenchmark Study for the Seismic Analysis and Testing of WWER Type NPPs, IAEA, Vienna ().Cited by: 2.
A nuclear explosion can cause an earthquake and even an aftershock sequence. However, earthquakes induced by explosions have been much smaller than the explosion, and the aftershock sequence produces fewer and smaller aftershocks than a similar size earthquake.
Not all explosions have caused earthquakes. The range of a possible earthquake.Seismic safety of nuclear power plants became an eminent importance after the Great Tohoku earthquake on 11th of March, and subsequent disaster of the Fukushima Dai-ichi nuclear.
IAEA, Earthquake experience and seismic qualification by indirect methods in nuclear installations, IAEA-TECDOC IAEA Vienna ().  U.S. Army Corps of Engineers, Engineering and design — seismic design provisions for roller compacted concrete dams, EP Department of the Army Washington D.C.
().Cited by: 1.